HOME
ABOUT
PRODUCTS
Hydraulic Breaker
Box Type Hydraulic Breakers
Side Type Hydraulic Breakers
Top Type Hydraulic Breakers
Backhoe Loader Type Hydraulic Breaker
Hydraulic Breaker for Piling
Post Driver Hydraulic Breakers
Skid Steer Type Hydraulic Breakers
Hydraulic Breaker Spare Parts
Front&back Head
Cylinder
Accumulator
Chisel
Through Bolt
Side Bolt
Pin
Relief Valve
Accumulator Bolt
Adjuster
Rod Pin
Seal Kit
Main Valve
Piston
Out Bush
Inner Bush
Excavator Attchments
Quick coupler
Compactor
Hydraulic shear
Crush bucket
Pulverizer
Screen bucket
Service
NEWS
Company news
Industry news
CONTACT
Español
Knowledge
Case
Why does the hydraulic fluid in excavators turn black? This time it's not because of the heat!
Construction machinery on the hydraulic components are many, hydraulic oil in the hydraulic system plays a lubricating role, if not replaced for a long time, the hydraulic oil will become black, viscosity reduction will directly lead to the excavator main pump injection, valves, multi-way reversing valves, oil seals and so on the intensified wear and tear of the various hydraulic system parts, over time resulting in the components of the gap between the occurrence of leakage and seriously affect the excavator's action consistency, powerlessness and other phenomena. Phenomenon.
Excavator hydraulic breaker hammer internal workings in detail
The relationship between the area A1 of the upper chamber of the cylinder and the area A2 of the lower chamber of the cylinder is A1>A2, and A2 is always subject to high pressure. When A1 is changed from high pressure to low pressure, the piston moves upward, accompanied by high-pressure nitrogen in the rear cylinder body under pressure to store energy.
Excavator Hydraulic Breaking Hammer Introduction and Working Principle
Hydraulic crushing hammer referred to as “crushing hammer” or “crusher”, the power source of the hydraulic crushing hammer is the excavator, loader or pump station to provide the pressure, it can be more effective in the construction of the project can be crushed stone and rock, improve work efficiency. Selection of hydraulic crushing hammer principle is based on the excavator model, the operating environment to choose the most suitable hydraulic crushing hammer, according to the hydraulic network of senior consultants Li Gong analysis of China's hydraulic crushing hammer is mainly from foreign countries to introduce technology, South Korea's crushing hammer foundation is good, hydraulic network of Li Gong reminds us not to forget to support the domestic technology so that there is a better development.